Electrical Testing Basingstoke – Professional Electrical Safety Testing Services

Testing requires that an electrical or electronic device undergo specific electrical safety tests before it can be placed on the market. Electrical safety tests ensure manufacturers that their products comply with reference standards, protecting people and the environment. Electrical testing Basingstoke applies to all electrical equipment intended for use with voltages between 75 and 1,500 volts direct current and between 50 and 1,000 volts alternating current. The objective of the Emergency Electrician Basingstoke is to ensure that the relevant electrical equipment has adequate protection against various types of electrical hazards. Emergency Electrician Basingstoke specifies the expected health and safety risks, establishing the parameters that devices must meet to be considered safe for their intended use.

Call Us Now 01256594127

Types of Electrical Safety Tests

The types of electrical safety tests performed may vary depending on the type of product. The types of tests prescribed by the various standards are similar, however, each standard identifies specific levels of severity designed to ensure the effectiveness of the test without compromising the integrity of the equipment being tested. Electrical testing Basingstoke, performs all tests necessary to demonstrate the compliance of electrical and electronic devices with the safety requirements of European and international technical standards.

These are some of the main electrical safety tests performed:

• Measurement methods for contact current and protective conductor current
• Standby consumption analysis of household electrical appliances
• Dielectric strength
• Insulation resistance
• Protective conductor resistance
• Component temperature measurement
• Component overload and short-circuit testing
• Capacitor discharge time
• Electrical continuity of earth conductors
• Protection tests against access to live parts
• Abnormal uses such as over- or under-powering
• Electronic circuit faults
• Safety software analysis
• Mechanical strength, construction, circuit clearances, components, insulation

Electrical safety tests: main sectors in which we operate

We perform tests in accordance with qualified standards and related in commercial and domestic environments, including the main national and international deviations. Pre-compliance assessment of the device to verify compliance with Directives 2014/35/EU and 2014/30/EU or IEC standards

• Verification of accompanying documentation and markings
• Analysis of the product’s technical documentation (technical file)
• Testing in our laboratories or at the customer’s site
• Risk analysis verification
• Access to the European (CE) and international (IEC) market
• Medical Devices

Medical Device Testing and Compliance

We perform tests and trials in accordance with IEC/EN 60601-1 standards and related parts II in the medical field. Our test reports can be used to complete the technical file in accordance with Directive 93/42/EC and the new Regulation 2017/745/EU. Pre-compliance analysis of medical devices to verify compliance with Directives 93/42/EC and 2017/745

• Verification of accompanying documentation
• Verification of product technical documentation (technical file) and markings
• Testing in our laboratories or at your premises
• Verification and validation of medical software
• Verification of risk analysis
• Verification of usability
• Verification of clinical validation

Call Us Now 01256594127

Industrial Equipment Testing and Certification

Our experience and accreditations allow us to perform tests in accordance with the IEC/EN 61010-1 standard and its related parts in industrial settings, including the main national and international deviations. Pre-compliance assessment of the device to verify compliance with Directives 2014/35/EU and 2014/30/EU or IEC standards. Functional safety assessment in accordance with IEC 61010

• Marking assessment
• Assessment of accompanying documentation
• Analysis of the product’s technical documentation (technical file)
• Testing in our laboratories or through on-site testing
• CE Marking and Certification
• RED Certification
• Risk analysis assessment

Audio and Video Equipment

We perform tests in accordance with IEC/EN 60950 and IEC/EN 62368-1 and the related parts II for domestic and commercial applications, including the main international and national deviations. Pre-compliance assessment of the device to verify conformity with Directives 2014/35/EU and 2014/30/EU. Functional safety analysis in accordance with IEC 62368-1

• Marking verification
• Audit of accompanying documentation
• Analysis of the product’s technical documentation (technical file)
• Testing in our laboratories or through on-site testing
• Risk analysis verification

Lighting fixtures

We perform tests in accordance with IEC/EN 60598-1 and its related parts two for commercial and residential applications, including the main international and national deviations. Product pre-compliance assessment to verify compliance with Directives 2014/35/EU and 2014/30/EU. Safety verification in accordance with IEC 60598-1

• Marking verification
• Audit of accompanying documentation
• Audit of product technical documentation (technical file)
• Testing in our laboratories or on-site
• Risk analysis verification

Contact Us

Ensuring safe products through electrical safety testing. Electrical testing Basingstoke provides its customers with cutting-edge technologies and highly qualified personnel, ensuring rapid response times and timely, comprehensive answers. Emergency Electrician Basingstoke allow you to save time and reduce costs, thanks to our agility and extensive experience in the complex world of compliance. We can support companies in obtaining all the necessary answers, helping them ensure the production of products that are safe for people and the environment. Contact us: 01256594127 for more information.

The technicians we collaborate with: